SheringhamSurf chatterbox

[IPB_Tech]

Yaesu 857D Homebrew Separation Kit

You will need a RJ12 cable, Note: not the Hornby type.
a CAT5e RJ45 Cable and a 3.5mm MONO Audio Extension Cable.



10M Examples

6 Way RJ-12 Male to 6 Way RJ-12 Male
http://www.lindy.co.uk/6-way-rj-12-cable-10m/34226.html *See Note Below

10m CAT5e UTP Solid Core Network Cable
http://www.lindy.co.uk/10m-cat5e-utp-solid...grey/44480.html

As for the Separation plate .... not at this time

I accept no responsibility for any inaccuracy, errors or emissions or for the consequences arising from the use of Homebrew equipment

[IPB_Tech]

I used kenable Ltd for the 6 Way RJ-12 due to it's cheap price.......

1 x RJ12 6P6C to RJ12 6P6C Cable Plug to Plug (RJ11 with 6 wire) White 5m £2.44
link... http://www.kenable.co.uk/product_info.php?products_id=2396

* Note

* The RJ12 cable with have to be crossed over to work on the FT-857D

Cut cable & reverse wires, use a small Soldering Iron tip and isolate each wire with small pieces of insulating tape, kept mine quite tidy, just tested it and it works fine.

if you blow up your radio.... don't blame me